menualto_en.gif

    
 
menudefeng.gif

 

SERIES BD

ISO 15407-1/2 Valves and solenoid valves 18-26 mm 5/2-5/3-3/2+3/3

Valves and solenoid valves, spool system, side 18 and 26 mm according to ISO15407-2 or VDMA 24563/ISO15407-
1 specification which establish the dimensions of the bearing surface and the minimum distance between two valve places, guaranteeing the interchangeability and possibility to include any valve providing it complies with above specification.

- VDMA 24563/ISO 15407-1 pneumatic coupling standard between valve and sub-base.
*ISO 15407-2 electric coupling standard between valve and sub-base.

Body acetalic resin and die-cast zamac
Pressure 9 bar max. (electrical control)
x 10 bar max. (pneumatic control)
Fluid temperature 50°C max.
Ambient temperature -20° ÷ 50°C
Fluid filtered air 50 µm not dehumidified or neutral gasses
x lubricated or non lubricated
Switching system spool
Valve function 5/2-5/3-3/2+3/2
Sub-base according toFlow-rate Nl/min with fitting
x  VDMA-ISO oversized
xx x ø6   ø8  ø10 ø12  ø6 ø8 ø10 ø12
x 5/2 500  950  1200  1250 500  1050 1500 1700
x 5/3 500  950 1100 1150 500  1050  1300  1400
x 3/2+3/2 500  950  1150  1250 500 1050  1450 1650
Seals nitrile rubber
Control indirect electropneumatic or pneumatic
Return mechanical spring, pneumatic spring
x Manifold sub-base 1 valve place and end plates with side connections in aluminium.
Voltage 24Vd.c. - 2,5W standard
x 12Vd.c. - 2,5W upon request
Protection IP65 for BDE series; for the other series depending on the
x coil used
Coil DD series
Flying prewired connectors and connectors for serial systems

2D - 3D CAD          pdf catalogue        image download        Pneumatic components>>Automotive

© 2006 Univer S.p.A.   All Rights Reserved